Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Oleic Acid, Glycerol Monooleate, Sodium Oleate, Ethyl Oleate, Polysorbate 80 Manufacturers made in a FDA-GMP plant is offered.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Home ---------- Contact Glycerol Monooleate

Dums Exporter Supplier Bulk Exporter Polysorbate 80 Manufacturers

Polysorbate 80, SDS MSDS Sheet of Manufacturers Exporters

Specifications of Polysorbate 80 USP NF BP Ph Eur Grade Manufacturers.

Polysorbate 80 SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. PRODUCT DESCRIPTION

Product Name: Polysorbate 80
Synonyms: Polyoxyethylene 20 Sorbitan Mono-oleate
CAS Number: 9005-65-6
EINECS EC Number: 500-019-9
Molecular Weight: 2917
Molecular Formula: C64H124O26

2. HAZARD IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
None

Signal Words: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Principal Components: Polysorbate 80
CAS Number: 9005-65-6
EINECS EC Number: 500-019-9

4. FIRST AID MEASURES

Always get medical attention after the first aid is over.

Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If Polysorbate 80 is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.
Notes to Physician: Treat symptomatically

5. FIREFIGHTING PROCEDURES

Extinguisher Media: Water spray. Carbon dioxide (CO 2). Dry chemical. alcohol-resistant foam.
Flash Point: >110C
Autoignition Temperature: No information available
Flammable Limits in Air % by Volume: N/A
Hazardous Combustion Products: Carbon monoxide (CO) Carbon dioxide (CO2) and fumes.
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.

6. SPILL OR LEAK PROCEDURES

Steps to be taken in Case Polysorbate 80 is Released or Spilled:
Ventilate area of leak or spill. Wear appropriate personal protective equipment.
Abrorb and sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Do not let product enter drains. Small amounts of residue may be flushed to sewer with plenty of water.

7. SPECIAL PRECAUTIONS

Wear personal protective equipment. Ensure adequate ventilation. Avoid ingestion and
inhalation. Avoid contact with skin, eyes and clothing. Keep Polysorbate 80 in a well closed container stored under cold to warm conditions in a ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues; observe all warnings and precautions listed for the product.

8. SPECIAL PROTECTION INFORMATION

Exposure Guidelines: This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation Local Exhaust: Yes
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.

9. PHYSICAL DATA

Molecular Weight: 2917
Molecular Formula: C64H124O26
Appearance and Odor: Dark yellow liquid material. Odorless.
Melting Point: NA.
Boiling Point: NA.
Autoignition Temperature: No information available
Decomposition Temperature: No information available
Density: 1.06 g/cm3
Solubility: Partly soluble in water

10. REACTIVITY DATA

Stability: Polysorbate 80 is stable
Conditions to Avoid: Heat.
Incompatibility (Materials to Avoid): Strong oxidizing and bases.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur

11. TOXICITY DATA

LD50 Oral - Rat - > 63,840 mg/kg
Carcinogenicity: No product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.
Mutagenic Effects: No information available
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.

12. ECOLOGICAL DATA

Toxicity: Avoid release into the environment.
Persistence and Degradability: Soluble in water Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.

13. DISPOSAL INFORMATION

Waste Disposal Methods: Dispose Polysorbate 80 in accordance with all applicable Federal, State and Local regulations.

14. TRANSPORT INFORMATION

DOT & ADR/RID: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.

15. REGULATORY INFORMATION

USA:
OSHA Hazards: No known OSHA hazards
SARA 302 Components: SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Polysorbate 80 BP Ph Eur USP NF FCC Food Grade Manufacturers

Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

India manufacturers exporters

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, etc.

Copyright and Usual Disclaimer is Applicable January 19, 2022